
Self-loading L-arms
Hydraulic L-arms close around the tires from the controls.
T-bar & L-arms, photo 1 of 7
$25,000Unit-only estimate
$35,000Base installed estimate
Optional accessories shown in some photos.
Detroit Wrecker’s self-loading underbody wheel lift. Sold by San Jacinto Wreckers, with installation in Crosby, near Houston.
Hydraulic L-arms close around the tires from the controls.
Two electric motors drive the hydraulic power unit, housed in a toolbox in the bed.
Adjustable hex pins and bronze bushings at the pivot points. Follow Detroit’s lubrication and adjustment instructions.
Prefer an in-bed layout? Compare Lil Hercules with Baby Gladiator.
Compare unitsBuy the unit alone or have us install it near Houston. Customers welcome nationwide.
Installed package
$25,000 unit + $10,000 installation package. Includes frame reinforcement and rear suspension. Optional accessories are extra; final quote after truck review.
Meeting these starting requirements is not fit approval. We review axle and tire ratings, available payload and the completed setup. Reinforcement does not increase the truck manufacturer’s ratings.
Frame and suspension. The bed comes off for frame access. Reinforcement plates need fitting and fabrication. Our package includes custom rear helper springs, relocated helper pads and Fox rear shocks with reservoirs.
Spare tire and tanks. An underbody spare needs another storage location if it occupies the lift’s space. A rear fuel tank cannot remain in the installation space; tank replacement or relocation and DEF-tank clearance are reviewed for your truck.
Trailer use. Tell us about your receiver, gooseneck or fifth-wheel hitch. Compatibility depends on hardware and clearance; truck and hitch limits still apply.
Sold separately. Select accessories in the builder; we confirm compatibility with your truck and lift.
A dedicated attachment for carrying a motorcycle.
$1,500 attachment estimate
Attachment detailsFork holders and three sets of forks. Use approved pickup points and stay within equipment limits.
$4,800 kit estimate
Watch the fork kitAlso available: wireless controls, a winch, L-arm extenders, towing dollies and storage bunks. Dollies and bunks are separate options.
View all optionsSee the equipment operate and keep the overview for later.
Manufacturer demonstrations may show optional equipment. Follow the instructions for your unit.
Detroit specifies a minimum 10,000 lb truck GVWR—not a 10,000 lb trailer-towing rating. Ram/Dodge 2500 trucks with rear coil-spring suspension are not compatible. A rear fuel tank can interfere and may need relocation. Frame reinforcement and the specified rear-suspension preparation are required. These are starting requirements, not approval for every truck that meets them.
An underbody spare needs another location if it occupies the lift’s space. Receiver, gooseneck and fifth-wheel use need a review of the exact hardware and clearances. Tell us which trailer and hitch you use before we plan the installation; the truck and hitch ratings still apply.
No. Lift and tow ratings describe the equipment, not approval for your completed truck. The truck’s ratings, installed weight, load and operating conditions must also be considered. The vehicle being towed has its own transport instructions; a wheel lift or a set of dollies does not make every vehicle suitable for the same towing method.
Yes. Adjustable does not mean maintenance-free. Follow Detroit Wrecker’s lubrication, inspection and adjustment instructions for your exact unit. Keep its documentation and maintenance records, and check the applicable written warranty terms rather than assuming every component is covered for life.
Choose the equipment. Tell us about your truck.
We’ll review the fit and prepare your quote.
A quote request, not a checkout. No payment is collected.



